UV DTF GANG SHEET BUILDER

UV DTF transfers are suitable for any hard surface. You can also cut out the designs to stick them individually.  the size is 12inches by 24 inch for gang sheet

They will adhere to most hard surfaces. They are waterproof and scratch-resistant. 

* Not recommended for dishwashers. 

* You may need to trim as needed. 

Sizing guide Decals 3inch, 16 oz 9x3, 20 oz 9x8

*PLEASE NOTE WE DO NOT RESIZE AND PRINT ALL UPLOADS AS IS*

Directions: 

1. Peel backing off the transfer
2. Place the transfer on the cup. Make sure it is straight, as you cannot lift it again to reposition it. 
3. Smooth the design from the centre out to remove any bubbles
4. Rub the decals down with your fingers or a squeegee 
5. Peel the top layer of film off the design